Sound Clamping Monopole Glans Electrode (Diamond Plug Version)-Size 2

£32.95 £27.46
SKU:
40084-size 2

***Diamond Plug Not Included. Shown for display purposes only.***

After the runaway success of my Sound Clamping Monopole Glans Electrode, a number of my customers asked if it could be modified to hold the E-Stim Systems Diamond Plugs securely in place as a urethral electrode. I jumped at the chance to design a replacement upper ring to accommodate the Diamond Plug holding it in place, so you needn't worry about it dropping out.

Not for the faint-hearted, but oh, so much fun. This monopole electrode addresses one of the biggest problems when using e-stim sounds for urethral play. How do you keep it in place?

No one wants an electro sound to fall out or go deeper than you had planned, so here is a solution. As suggested by a very good friend of mine, this holder allows you to secure your sound in place, and the best bit is that it is also an electrode itself, so that opens up all sorts of possibilities in how you play.

Now supplied with two black nitrile o-rings to fit onto the Diamond Plug Sound to ensure a snug fit in the holder.

If you already have one of my Sound Holders, you can just purchase the top cap from my E-Stim DIY Components category.

The main parts of this electrode are made from ABS (think Lego plastic); it's hard-wearing, non-porous and doesn't need painting or any other finish. To produce these electrodes, I have had to invest in new equipment, and the post-print processing time to get the smooth, non-porous finish takes me a long time, which is reflected in the price. If you prefer the best, then this is the version for you. They will be available in very limited quantities, so grab one while you can.

The lower ring has a length of high-quality 6mm CR running through it, and this CR is in direct contact with the 4mm CR holding the cap in place. This turns the whole thing into a cage-style monopole electrode with lots of surface area (always a good idea to prevent hot spots).

The 4mm CR is easy to adjust and allows accurate positioning of the cap over your urethra. Once tightened, it is secured by two 4mm cord locks (not shown) to lock it in place.

The design of the lower ring allows you to use an elastic band if you want to apply more pressure, and this can help keep things snug if you are a grower and shrinker as you stim.

The Diamond Plug is held securely in place by the cap.

It will be dispatched with the conductive rubber tubing already fitted.

This electrode takes 2mm TENS style plugs. The Diamond Plug (not included) takes 4mm plugs, so the Bi-Cable is the ideal solution for hooking this electrode combination up to your control box.

***Diamond Plug Not Included. Shown for display purposes only.***

After the runaway success of my Sound Clamping Monopole Glans Electrode, a number of my customers asked if it could be modified to hold the E-Stim Systems Diamond Plugs securely in place as a urethral electrode. I jumped at the chance to design a replacement upper ring to accommodate the Diamond Plug holding it in place, so you needn't worry about it dropping out.

Not for the faint-hearted, but oh, so much fun. This monopole electrode addresses one of the biggest problems when using e-stim sounds for urethral play. How do you keep it in place?

No one wants an electro sound to fall out or go deeper than you had planned, so here is a solution. As suggested by a very good friend of mine, this holder allows you to secure your sound in place, and the best bit is that it is also an electrode itself, so that opens up all sorts of possibilities in how you play.

Now supplied with two black nitrile o-rings to fit onto the Diamond Plug Sound to ensure a snug fit in the holder.

If you already have one of my Sound Holders, you can just purchase the top cap from my E-Stim DIY Components category.

The main parts of this electrode are made from ABS (think Lego plastic); it's hard-wearing, non-porous and doesn't need painting or any other finish. To produce these electrodes, I have had to invest in new equipment, and the post-print processing time to get the smooth, non-porous finish takes me a long time, which is reflected in the price. If you prefer the best, then this is the version for you. They will be available in very limited quantities, so grab one while you can.

The lower ring has a length of high-quality 6mm CR running through it, and this CR is in direct contact with the 4mm CR holding the cap in place. This turns the whole thing into a cage-style monopole electrode with lots of surface area (always a good idea to prevent hot spots).

The 4mm CR is easy to adjust and allows accurate positioning of the cap over your urethra. Once tightened, it is secured by two 4mm cord locks (not shown) to lock it in place.

The design of the lower ring allows you to use an elastic band if you want to apply more pressure, and this can help keep things snug if you are a grower and shrinker as you stim.

The Diamond Plug is held securely in place by the cap.

It will be dispatched with the conductive rubber tubing already fitted.

This electrode takes 2mm TENS style plugs. The Diamond Plug (not included) takes 4mm plugs, so the Bi-Cable is the ideal solution for hooking this electrode combination up to your control box.

It is available in three sizes of lower ring:

  1. 26mm/1" Inside Diameter (at the inside edge of the conductive rubber).
  2. 32mm/1.25" Inside Diameter (at the inside edge of the conductive rubber).
  3. 38mm/1.5" Inside Diameter (at the inside edge of the conductive rubber).

For information about how to accurately measure the diameter of your penis, check out my Cock Ring Measuring Guide.

This product is made to order, and each takes me three days to print, post-process and finish. So please allow for the extra time needed for me to dispatch this bespoke item to you (I sometimes have ones ready-made and on the shelf, and these will be dispatched straight away).

Note: This product is supplied as is, and I am not liable for any problems that arise from its use. It is sold as a novelty item and carries no warranty. Your statutory rights remain. The images shown are renderings.

More Information
Target Area Penis
Conductive Rubber Type 4mm Diameter, 6mm Diameter
Number Of Poles 1 Pole - Monopole
Material ABS, Conductive Rubber
Color Yellow
Manufacturer Joanne's Reviews
Size Size 2 - 32mm/1.25" Inside Diameter
Socket Size 2mm
Connector Type 2mm Tens Style