Quick Summary
The Solution: You need a 3.5mm mono female to 2.5mm mono male adapter to connect E-Stim Systems electrodes and cables (which use 3.5mm plugs) to the DGLab Coyote 3 (which has 2.5mm sockets). This simple adapter bridges the gap, making the systems fully compatible.
The DGLab Coyote 3 Estim Control Box is a powerful, compact device loved for its wireless features, customizable waveforms, and advanced control options. But if you're pairing it with E-Stim Systems electrodes, you might hit a slight snag: incompatible connectors.
Don't worry—this post guides you through connecting these high-end products safely and effectively.
⚠️ Safety First
- Never place electrodes above the waist unless you are confident in your equipment and abilities.
- Use only approved adapters and cables to avoid damage or unintended stimulation.
- Start slow—the Coyote 3 is powerful, and intensity builds quickly, especially with metal electrodes.
- Clean all components thoroughly after each use.
What You'll Need
Essential Items:
- DGLab Coyote 3 Estim Control Box (fully charged)
- E-Stim Systems electrodes (e.g., insertables, pads, or surface electrodes)
-
Connection cables:
- Option 1: E-Stim Systems connection cables (ending in 3.5mm mono plugs) + 3.5mm mono female to 2.5mm mono male adapter (one per channel)
- Option 2: Coyote's included wires + 2mm to 4mm adaptor
- Conductive gel or lube (for insertables or pads - not needed for self-adhesive electrodes)
Recommended Accessories:
- Low Profile 4mm Cable - Excellent for use with E-Stim Systems' bipolar electrodes
- 4mm Low-Profile Adaptors - Makes sitting with electrodes inserted much more comfortable
Step-by-Step Setup Guide
1. Understand the Connector Types
- The Coyote 3's output sockets are 2.5mm mono (not 3.5mm as commonly found in other e-stim gear).
- E-Stim Systems cables typically terminate in 3.5mm mono plugs.
- This means you need a 3.5mm mono female to 2.5mm mono male adapter to bridge the gap.
Important: While mono (2-pole) adapters are best, you can also use stereo (3-pole) adapters.
2. Connect the Cables
- Ensure the Coyote is switched off.
- Plug the E-Stim Systems cable's 3.5mm mono plug into the female side of the adapter.
- Insert the 2.5mm male end of the adaptor into one of the channel outputs on the Coyote 3.
- Repeat for the second channel if you're using dual-channel play.
3. Attach the Electrodes
- Connect the electrode(s) to the opposite ends of the E-Stim Systems cables.
- Apply conductive gel or lube generously when using insertable or skin-play electrodes.
- Position electrodes correctly based on the type (monopolar vs. bipolar) and intended effect.
4. Power On and Configure
- Turn on the Coyote 3 and access the control menu (locally or via Bluetooth on your phone/tablet through its app).
- Choose a waveform mode and start at the lowest intensity setting.
- Slowly increase until the desired sensation is achieved.
Troubleshooting Common Issues
No Sensation Felt
- Check all connections are secure.
- Ensure the Coyote 3 is fully charged.
- Verify you're using the correct adapter type (mono).
- Apply more conductive gel to the electrodes.
Weak or Intermittent Connection
- Clean the adapter and cable connections.
- Ensure the adapter is fully inserted into both the cable and the Coyote.
- Check for any damage to cables or adapters.
Adapter Doesn't Fit Properly
- Confirm you have a 3.5mm female to 2.5mm male adapter (not the reverse).
- Avoid forcing connections - they should fit smoothly.
Wrapping Up
While the DGLab Coyote 3 and E-Stim Systems gear use different connection standards, a simple mono adapter makes them completely compatible. Once connected, you can enjoy the best of both worlds: the Coyote's advanced features and E-Stim Systems' trusted electrodes.
Whether you're an experienced e-stim enthusiast or just starting to experiment with electroplay, setting up your gear properly takes just a few moments and ensures a safer, smoother, and more enjoyable experience.
Next Steps
- New to e-stim? Check out our Beginner's Guide to Safe And Fun E-Stim Play
- Learn about The Best E-Stim Electrode Materials
- Avoid common mistakes with our guide: E-Stim for Beginners: 7 Common Mistakes to Avoid
If you found this blog post useful, let us know using the comment form down below.