Ball Contact Electrodes (Pair) – OxBalls SackSling / AirBalls Replacement

Upgrade the contacts. Keep the holder you already like.

These Ball Contact Electrodes are a direct replacement for the aluminium contacts supplied with OxBalls SackSling and OxBalls AirBalls electro sets.

Each contact is a cup-shaped electrode made from 316L stainless steel. The cup sits more naturally against the body than the original flat contacts, and the lower-profile design is more comfortable to use. Because they are stainless steel rather than aluminium, they are built to last and stay easy to clean.

Holder required. Not included.

These electrodes do not work on their own. They need an OxBalls SackSling or OxBalls AirBalls holder (or the matching electro version of those products) so the cups can sit in the existing contact/drain openings. If you already own the sling or stretcher, these drop in as the metal half of the setup.

Secure plug connection

Each socket uses a short section of conductive rubber to grip your plug and keep the electrical connection tight. That is the same approach we use on our other stainless electrodes: the rubber holds the plug, the steel does the work.

Sold as a pair.

Why swap the originals?

• 316L stainless steel instead of the original aluminium contacts
• Cup-shaped contact surface for a more natural fit against the scrotum
• Lower-profile design that sits more comfortably in the holder
• Conductive rubber in the socket to hold plugs securely
• Long-lasting, reusable metal contacts that clean properly between sessions

What’s included

• 2 × Ball Contact Electrodes (one pair)

What’s not included

• OxBalls SackSling or AirBalls holder
• Cables
• Control box
• Conductive gel

Compatibility

• Designed as replacement contacts for OxBalls SackSling and OxBalls AirBalls electro holders
• Intended for the existing contact / drain openings in those holders
• Use as a pair so you have two contact points — one under each side of the scrotum
• Works with standard e-stim control boxes and leads that match the plug size of your existing cables

If you do not already own a compatible OxBalls holder, these electrodes will not have anything to sit in.

How to use

1. Fit each cup into the contact opening of your SackSling or AirBalls holder before you put the holder on, if that is the easier route for your setup.
2. Apply a thin layer of conductive gel to the contact surface. Dry metal on dry skin is a fast way to get hotspots.
3. Connect one lead to each electrode. Do not put both plugs from the same channel into one contact.
4. Start low. Ball contacts can feel very focused once the circuit is closed.
5. If the sensation turns sharp, patchy, or one-sided, stop and check contact, gel, and whether a cup has shifted in the holder.

Care

Wash in warm soapy water after use, rinse, and dry thoroughly. Stainless steel contacts can be cleaned properly between sessions. Do not boil the conductive rubber inserts. Store dry.

A note on use These are body-contact electrodes for below-the-waist e-stim. Use a proper e-stim control box, keep the current path below the waist, and do not use e-stim if you have a pacemaker, another implanted electronic medical device, a relevant heart condition, or if you are pregnant. Turn the output down before connecting, disconnecting, or repositioning anything.